Ensimmäinen Edellinen Tuote 59 / 59
Tuoteryhmä: Kitaramikit
Gibson Pickups BurstBucker 3- Nickel

Gibson Pickups BurstBucker 3- Nickel





Burstbucker 3 on "kuumin" Burstbucker. Sopii sekä kaula- että tallamikiksi. 2 conductors.


Burstbuckers are Gibson pickups that aim to authentically recreate the classic tone of a PAF in a modern pickup. Gibson describes these as ‘Time Machines’, creating vintage tone in an all-new pickup. Who are we to argue with the guys that built the original?

The original PAF humbuckers varied hugely due to several factors. Firstly, whilst Alnico magnets were always used, the type of magnet (2, 3, 4, or 5) could vary. As these have different magnetic properties, the characteristic tone of the pickup could vary considerably.

Secondly, as pickups were wound using machines operated by humans with no definite ‘stop’ point, pickup windings could also vary hugely, with a great effect on pickup output.

The standard Burstbucker aims to recreate the best of PAFs with three differing models. All three have unbalanced coils (less turns of wire on one coil than the other), which results in a tonal ‘bite’.

The Burstbucker 1 is a slightly under-wound model, with medium output. It maintains the classic ‘creaminess’ and edge that typifies a PAF, but with an output that means it is equally adept as a neck or bridge pickup.

The Burstbucker 2 is slightly ‘hotter’, with more turns of wire. According to Gibson, its output is closer to that of a ’57 Classic.

The Burstbucker 3 has more windings still, and its over-wound design makes it the highest output Burstbucker, but again, with classic PAF tone.