Ensimmäinen Edellinen Tuote 18 / 59 Seuraava Viimeinen
Tuoteryhmä: Kitaramikit

Bare Knuckle Riff Raff Humbucker Set - Nickel

Verkkokauppa: Tilapäisesti loppu, kysy saatavuus

Myymälä: Tilapäisesti loppu, kysy saatavuus

Hinta:


439.00eur



Kpl:  

Riff Raff on vintage-tyyppinen humbucker, joka tarjoaa purevan yläpään kera selkeän ja paksun alapään. Mikkisetti on suunniteltu vastaamaan 60-luvun alussa käytettyjä mikkejä, mutta Riff Raffilla soitetaan myös raskaamaapaa rockia.

Tyylilajit: Blues, Funk, Indie, Reggae, Britpop, Garage, Punk, Alternative, Classic Rock, Heavy Rock,'80s Metal.

Output:

Vintage

Bridge DC:
Magnet:

8.2KΩ *
Alnico V

Neck DC:
Magnet:

7.4KΩ *
Alnico V


Bridge Spacing - 50 mm

  • Conductor - 4
  • Leg - Short (1/4")
  • Colour - Nickel


 

Markkinoiden parhaista materiaaleista käsinkäämityt Bare Knuckle mikkisetit ovat olleet nimekkäiden soitinrakentajien ja soittajien luottomikkejä jo vuosia.
Käsinkääminnän suurin etu massatuotteisiin nähden on se, että käämi kierretään hieman ristikkäin, jolloin käämien kierrokset eivät mene toisiaan lähekkäin kuten koneella. Tällä tekniikalla saavutetaan pienempi kapasitanssi, joka taas luo selkeämmän, avoimemman, dynaamisemman ja kirkkaamman soundin.

Mikeistä löytyy hyvät ääninäytteet tehtaan sivulta (linkki tämän sivun alalaidassa)

Vaikka avoin käämitys antaakin parhaan dynaamiikan, kirkkauden ja kosketusherkkyyden hiljaa soitettaessa, on sillä yleensä huonotkin puolensa. Isoilla volyymeilla soitettaessa mikki on erittäin kiertoherkkä.
Bare Knuckle on ratkaissut tämän ongelman siten, että he käyttävät erityistä parafiinin ja mehiläisvahan sekoitusta, johon mikki käämityksen jälkeen upotetaan. Tämä toimenpide eliminoi kiertoherkkyyden täysin.

Bare Knucklen mikeillä on elinikäinen takuu.

Pakettiin kuuluu:

-Mikkisetti

-BKP/Rotosound kielisetti 10-46

-BKP-plektra

-Kytkentäkaavio sekä takuulaput

-BKP-tuoppialusta Englantilaiseen tapaan

 

Tight and punchy bass response with a smooth bite in the high-end define the voice of early '60s humbucker-driven rock'n'roll.

The Riff Raff humbucker is based on the shorter rough cast Alnico V PAFs of 1960, with a more symmetrical wind of 42 AWG plain enamel wire providing more focus in the upper-mids and brighter highs. While the same build standard and components of the other vintage humbuckers in the range apply, the Riff Raff delivers a more aggressive vintage tone and unmistakable rock voice. The bottom-end is deep but very controlled and coupled with the extra cut in the high-end, allow for plenty of snap and a classic range of organic, clean and driven tones.

Although voiced as a vintage rock humbucker, hard rock and metal players will enjoy the punchy and focused tone when used with hi-gain rigs.

 

  • Scatter-winding can only truly be done by hand and represents a high degree of skill by the person winding the coil. Although time consuming, it has many advantages over conventional machine winding and mass-production, not least the far superior tone and dynamics produced. We deliberately scatter the wire as we build up the windings of the coils so the wire isn't as even turn on turn, layer on layer, as with the more uniform wind of an automated machine with pre-tensioning. This lowers the distributed capacitance that exists between the turns of wire. Lower capacitance means improved high-end clarity, the resonant peak increases slightly and frequency response is greatly extended. The tension of the wire is also varied as it moves through the operator's fingers reflecting the ability to control the tension within the coil by the person winding the pickup. The result is a clearer, more open tone that has the impression of being louder purely by the amount of extra detail and dynamics present.Accelerated bass response for exceptionally fast tracking of high-speed staccato riffing with crushing mid range and precise high-end articulation; perfect for the modern metal guitarist.
Tuotearvioinnit