Ensimmäinen Edellinen Tuote 26 / 59 Seuraava Viimeinen
Tuoteryhmä: Kitaramikit

Bare Knuckle HSS Stormy Monday - 2 x Apache's

Verkkokauppa: Varastossa

Myymälä: Varastossa

Hinta:


399.00eur



Kpl:  

Apache/Stormy Monday HSS-setti sopii hyvin seuraaviin tyylilajeihin: Blues, Country, Jazz, Funk, Indie, Reggae and Classic Rock

Bridge Spacing - 53 mm

  • Conductor - 4
  • Leg - Short (1/4")
  • Colour - Nickel

Markkinoiden parhaista materiaaleista käsinkäämityt Bare Knuckle mikkisetit ovat olleet nimekkäiden soitinrakentajien luottomikkejä jo vuosia.
Käsinkääminnän suurin etu massatuotteisiin nähden on se, että käämi kierretään hieman ristikkäin, jolloin käämien kierrokset eivät mene toisiaan lähekkäin kuten koneella. Tällä tekniikalla saavutetaan pienempi kapasitanssi, joka taas luo selkeämmän, avoimemman, dynaamisemman ja kirkkaamman soundin.

Mikeistä löytyy hyvät ääninäytteet tehtaan sivulta (linkki tämän sivun alalaidassa)

Vaikka avoin käämitys antaakin parhaan dynaamiikan, kirkkauden ja kosketusherkkyyden hiljaa soitettaessa, on sillä yleensä huonotkin puolensa. Isoilla volyymeilla soitettaessa mikki on erittäin kiertoherkkä.
Bare Knuckle on ratkaissut tämän ongelman siten, että he käyttävät erityistä parafiinin ja mehiläisvahan sekoitusta, johon mikki käämityksen jälkeen upotetaan. Tämä toimenpide eliminoi kiertoherkkyyden täysin.

Bare Knucklen mikeillä on elinikäinen takuu.

Pakettiin kuuluu:

-Mikkisetti

-BKP/Rotosound kielisetti 10-46

-BKP-plektra

-Kytkentäkaavio sekä takuulaput

-BKP-tuoppialusta Englantilaiseen tapaan

 

Magneetit: Flat  Vintage

Bridge DC:
Magnet:

7.7KΩ *
Alnico II

Middle DC:
Magnet:

5.6KΩ *
Alnico III

Neck DC:
Magnet:

5.6KΩ *
Alnico III

 

 

All of our HSS sets use the default options of 53 mm pole spacing, 4 conductor, and short leg on the bridge humbucker with mid and neck single coils flat magnet profile.

 

The mid and neck single coil are wound specially to hum-cancel in positions 2&4 so that a 5 way switch offers the following options:

  • Position 1 bridge humbucker
  • Position 2 bridge slug coil and middle single coil in parallel (hum-cancelling)
  • Position 3 middle single coil
  • Position 4 middle and neck in parallel (hum-cancelling)
  • Position 5 neck single coil

.

Although voiced as a vintage rock humbucker, hard rock and metal players will enjoy the punchy and focused tone when used with hi-gain rigs.

  • Scatter-winding can only truly be done by hand and represents a high degree of skill by the person winding the coil. Although time consuming, it has many advantages over conventional machine winding and mass-production, not least the far superior tone and dynamics produced. We deliberately scatter the wire as we build up the windings of the coils so the wire isn't as even turn on turn, layer on layer, as with the more uniform wind of an automated machine with pre-tensioning. This lowers the distributed capacitance that exists between the turns of wire. Lower capacitance means improved high-end clarity, the resonant peak increases slightly and frequency response is greatly extended. The tension of the wire is also varied as it moves through the operator's fingers reflecting the ability to control the tension within the coil by the person winding the pickup. The result is a clearer, more open tone that has the impression of being louder purely by the amount of extra detail and dynamics present.Accelerated bass response for exceptionally fast tracking of high-speed staccato riffing with crushing mid range and precise high-end articulation; perfect for the modern metal guitarist.
Tuotearvioinnit